Hot Air Stenter

We are engineering the best of technology called hot air stenter for textile industry. This revolutionary idea for finishing technical textiles is now available for buyers at the competitive market price. The product is tested in-house for quality. It is easy to assemble, operate maintain. Lots of textile industries have used the machine & found it very cost effective.

Technical Specification

No. of Blowers ( 7.5 to12.5 HP)	:	Two per Chamber (depending up on width of machine)
Exhaust motors( 3 HP/5Hp)	:	Nos depending up on length of machine
Evaporation Capacity	:	125 kg. Of water / ch / hr
Fabric Width	:	600mm - 4000 in steps of 200mm
Mech. Speed	:	0 - 120 mtr / min
Over Feed	:	up to -5% to +40%
Heating Media	:	Oil / Gas / Steam
Maximum Temperature	:	225° C

Extra Accessories

Big Batch unit is provided with pneumatic cylinder for easy movement of it	:	Fabric supporter at feeding end
Cooling cylinder for additional cooling of fabric to reduce the sudden shrinkage of fabric	:	Moisture indicator cum controller
Stop mark preventing damper system.	:	Electronic bow and weft straightening device
Automatic moisture control with correspondent speed variation	:	Exhaust humidity controller
TV with camera at feeding and delivery end	:	Steaming device
Vacuum slit for extra suction of water	:	PLC controlled drive system
Gumming device of selvedge	:	Static eliminator
Edge spreader
Suction & frimming device

Fabric Transfer Device

Fabric transfer device is optimized by installing Centers supports, S.S. Pipe from Inlet Desk to the entrance of Hot Air compartmentfor & above 2400ww m/cs. Consist of overfeeding unit giving maximum overfeed up to 40%. Consist of pinning device for perfect pinning on selvedges with uncurling device. (Optionally edge spreader and gumming device are provided for knitted fabrics).

1 | 2 | Next »

Clip Type Inlet Desk With

(1) Scroll Roller

(2) Fabric Tension Roller

(3) 2 - Fingure Uncurling Device

Pin Type Inlet Desk With

(1) Scroll Roller

(2) Fabric Tension Roller

(3) 3 - Fingure Uncurling Device

(4) Overfeeding 2 Roller

Pin & Clip Type Inlet Desk With

(1) Scroll Roller

(2) Fabric Tension Roller

(3) 2 - Fingure Uncurling Device

(4) Overfeeding Roller

View of open chamber

Close circuit design, Radial fans, detachable nozzles, oil heated/ gas faired, on line filter cleaning etc.

Oil Heating Media

High efficiency spirally wound hot deep galvanized finned round tube eight pass radiators for higher and faster rate of heat transfer.

High Efficiency Blowers

Specially designed high efficient radial impellers give most effective hot air circulation & unique nozzles gives most effective drying. Impellers are well balanced Inspection, cleaning etc. Are very easy, thanks to big inspection windows on blower sockets.

Nozzle Box

Specially designed Nozzles with embossed holes giving maximum uniform distribution of hot air & are effected on best drying course. Nozzles are detachable - can be removed, cleaned & fitted in very short time - thus help in keeping machine drying efficient constant . Big openable doors with detachable nozzles gives max. Access inside the chambers for repairs & cleaning.

1 | 2 | Next »

Product Range

Home | Profile | Contact Us| Enquiry Form